3D Printer List

OpenSL 3D Printer: A Stereolithographic printer, For Everyone. Pricerange: $1100.00 (no case) Max build-size: cm Assembly time: 6-8 hours http://www.indiegogo.com/projects/opensl-3d-printer-a-stereolithographic-printer-for-everyone?c=hom

Pricerange: $ 1000.00 Max build-size: 14 x 11 x 20 cm https://www.indiegogo.com/projects/solus-a-high-resolution-dlp-3d-printer Resolution and Build Area As with most DLP printers, the XY build area is dependent on the XY resolution you wish to print at. The maximum XY build area is 14.5 x 11 cm and the maximum height is 20cm. The extendable legs allow for a wide range of resolutions. For the pr..

Pricerange: $ Max build-size: 28 x 21 x 20 cm - Build volume: 280x210x200 mm (11.02"x8.26"x7.87")- Voxels in build volume: more than 1.5 billion voxels- Layer heights: 30 microns to 100 microns- Z-motor resolution: 10 microns (0.000393")- Speed: 10 seconds per 0.1 mm layer- Minimal feature size XY@280x210 mm: 270 microns- Footprint: 620x630x490 mm (24.4"x24.8"x19.3")- 3.2" touch screen supports ..

Pricerange: $ 1000.00 Max build-size: 12.8 x 12.8 x 18 cm Minimum Thickness: 0.025mm (and FORM1 is exactly the same precision parameter)Size: 380 x 380 x 550mm Build Size: 128 x 128 x 180mm (actual height is greater than 180mm, less than 190mm)Environmental Requirements: room temperature of at least 10 degrees in an office environment and away from direct sunlight Photosensitive Resin: 3% shrink..

Pricerange: $ Max build-size: cm http://dwslab.com/ http://www.dwssystems.com/ Technical Specifications3D printing method : Laser StereolithographyWorking area : Ø 180×180 mmLaser source : Solid State BlueEdge® BE-1300XSlice thickness : 10-100 micronsMinimum feature size : 80 micronsScanning method : GalvanometerSoftware : XFAB Controller, Nauta™ XFAB EditionInput file format : .stl, .slcMachine..